vectra 100 turbo

**JATBOY** · 14th September 2006, 21:51

got a standard vectra edition 100 turbo would like to up the BHP whats the best route to take ........pls help am new

**Jamie** · 14th September 2006, 21:52

Que Duncan with his BSR remap advice!

**Caterman** · 14th September 2006, 21:59

Yup, BSR remap will take you to over 215bhp

**Duncan** · 14th September 2006, 22:00

lol @ Jamie

BSR remap (what I have) - info here.

Abbott remap - about £100 less but can't be reprogrammed and removed yourself like the BSR one.

I'm currently running 217bhp and 249lbft to give you an idea of figures.

HTH

D

**JATBOY** · 14th September 2006, 22:03

cheers ....any websites or phone numbers...plssssssss
wots the cost are we looking at 100`s?
cheers lads

**Duncan** · 14th September 2006, 22:08

All in the posts and links.

But yes, in a nutshell you're looking at hundreds. BSR is around £550, Abbot is £450. A good quality remap doesn't come cheaply!

D

**GARY3306** · 14th September 2006, 22:16

....and I would recommend if you're gonna do it then pay for the best and get the BSR. The old addage of 'you get what you pay for'. Let us know how you proceed.

**JATBOY** · 14th September 2006, 22:27

will go for the BSR kit. will i need other stuff induction kit ?any gauges ? be honest i dont really work on cars normally get the work done, could i remap or should i leave it to someone how understand remaping

**Duncan** · 14th September 2006, 22:30

You don't 'need' any other stuff. You can fit an induction kit (not sure what it will do on that engine with the remap), I did fit a boost gauge but again you don't need to. With the BSR unit the remapping is a doddle. Plug the unit into the socket under the ashtray, press a couple of buttons and leave it to program - takes less than 10 minutes.

D