Anyone know what these are/do ? They are in the vacuum pipes.
Anyone know what these are/do ? They are in the vacuum pipes.
Have consideration for the deaf, if you're gunna fart, make it smell !
Non returns at a guess as they have a direction of flow.
Yep, as said above Phil, they are non-return valves
I ''think'' ive heard people say these can be parted & cleaned as sometimes they get a little bit of crap in them.
The best way to check if the valves are working is with the engine off pump your brake pedal, after four or five pumps on the pedal the brake pedal will become harder to push down (the brake servo will have used up all the vacuum stored in it) if the valves are not working the servo will not hold any vacuum with the engine off and the pedal will be firm almost straight away.
one way non return valve i think
As said above......
Hmmm - they will have a impact on the cost of my planned mod then !
Ta - chaps.
Have consideration for the deaf, if you're gunna fart, make it smell !
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks