Newbie with in need of a little help!

**davidxr20** · 10th February 2011, 21:07

hi sorry its my first post and asking for help i have a 2.2 vectra sri 2003

i have had it about a month and abs or traction control dont work i dont even get a light when u turn the key to position 2 i have checked the fuses IN THE ENGINE BAY and they are all fine

i have had it on the diagnostics and came back with
p1390 left wheel speed sencer
P1613 Immobiliser No Or Wrong Signal Immobiliser
U2108 CAN-BUS no Communication with ABS/TC
U2139 Lost communications CIM steering column module
u2105 no communication with ecm
U2139 Lost communications CIM steering column module
u216 no communication instrument control

any help will be grate thanks david

**Big Sig** · 10th February 2011, 21:19

Try unplugging the abs in the engine bay and cleaning the plugs contacts. Could be dirty. Also it looks like you may need a new hub/sensor on the wheel.

**davidxr20** · 10th February 2011, 21:28

Originally Posted by Big Sig

Try unplugging the abs in the engine bay and cleaning the plugs contacts. Could be dirty. Also it looks like you may need a new hub/sensor on the wheel.

thanks iv tryed cleaning the abs plug and a bit wd40 and no luck

iv just ordered the wheel bearing hub kit

**leonvectrac** · 10th February 2011, 21:39

Areet welcome to vectra-c !

**davidxr20** · 10th February 2011, 22:14

Originally Posted by leonvectrac

Areet welcome to vectra-c !

cheers

**davidxr20** · 13th February 2011, 22:20

was abit bord the day so i took clocks out and found some one had covered the leads in black stuff so u could not see that the lights are on hopfully the new wheel bearing hub kit will turn them both out Attachment 38590
thanks for the help