hid fitting

[mrk]

eventually ordered my hid kit should be here this week ,(hq autolighting £50)
6000k 35w, i know its an"easy job" but is there a guide on here or just some pointers to help me along.
thanks as always

[M65]

Linky

[TomiboyC]

done mine on sunday, take out the airbox on drivers side and also the washer bottle filler neck on passenger side and this should give you enough room both sides to work. connect up before fitting to confirm everything works that way you know which way round the wiring goes etc. did this on sunday and first go i got the spade connectors round the wrong way

[felixx]

eventually ordered my hid kit should be here this week ,(hq autolighting £50)
6000k 35w, i know its an"easy job" but is there a guide on here or just some pointers to help me along.
thanks as always

It really is quite easy,but take care when you cut the hole in the rubber headlight cover.Make sure it's not too big and that the grommet on the HID bulb fits snuggly,and last but not least,once you've stashed the wiring block inside the headlight itself,REFIT THE RUBBER COVER BACK VERY CAREFULLY.If you don't it will come off and you will end up with moisture in your headlight!.(Then it's an afternoon with the wife's hair dryer!).FELIXX.