User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 10 of 10

Thread: cdti engine pic

  1. #1
    Regular Member jofenan's Avatar
    Join Date
    Mar 2010
    Location
    nottingham
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default cdti engine pic

    i think i have one of the rollers missing off my aux belt (between the bottom pulley and power steering pump?)..does anyone have a pic of the belts on a 2008 cdti 150 bhp please

  2. #2
    Regular Member the-wizard's Avatar
    Join Date
    Dec 2007
    Location
    Tamworth - ''The Capital of Mercia''
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vectra-c

    Trim : sri

    Engine : cdti

    Year : 2004

    Mileage : 98,000

    Default

    should be like this!

  3. #3
    Regular Member jofenan's Avatar
    Join Date
    Mar 2010
    Location
    nottingham
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    thanx....the bottom g is missing off mine!!!!!!

  4. #4
    Regular Member barney490's Avatar
    Join Date
    Dec 2009
    Location
    PRESTON
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    and the belt is still on?????? i didnt think the tensioner had enough movement in it to take up that amout of slack. If it helps, the part number for that roller is 55190811

  5. #5
    Regular Member the-wizard's Avatar
    Join Date
    Dec 2007
    Location
    Tamworth - ''The Capital of Mercia''
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vectra-c

    Trim : sri

    Engine : cdti

    Year : 2004

    Mileage : 98,000

    Default

    As above its a guide roller & would have thought the belt would be off!, but maybe your lucky get it done & dont run if poss before changing it.

  6. #6
    Regular Member DaveW555's Avatar
    Join Date
    Apr 2010
    Location
    Cannock
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    depends if someone has fitted a shorter belt to compensate for it, if they have then it will probably be ok but if you dont know the history of the motor get a pulley and a new belt

  7. #7
    Regular Member jofenan's Avatar
    Join Date
    Mar 2010
    Location
    nottingham
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    ok...got the pulley from vauxhall...then the belt wouldnt fit....and i checked with vauxhall and the local factors and it's the right belt....had to get one 3 cm's longer for it to fit???

    the rattle went away for a bit then returned about an hour later....but instead of it being only from tick over to about 1500 rpm its now there on tick over and when the engines under load...ie driving through the gears....you can rev the engine out of gear and there's nothing....its a very metallic sound...almost like a loose heat shield type of noise...but its coming from near the bottom pulley and go's when there's no v belt on...i've got a 7mm shorter v belt to make sure it's not the tensioner hitting itself again.....then i guess the next step is to change the bottom pulley???

  8. #8
    Regular Member Derek Mc's Avatar
    Join Date
    May 2010
    Location
    Sodding Typical on Sea
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    If the car is an 08 it should be still just about under warranty is it not?

  9. #9
    Regular Member the-wizard's Avatar
    Join Date
    Dec 2007
    Location
    Tamworth - ''The Capital of Mercia''
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : vectra-c

    Trim : sri

    Engine : cdti

    Year : 2004

    Mileage : 98,000

    Default

    The way to check a crank damper pulley is put a line across it & the sump/block as shown in the link/pic, run the engine stop/start & check the pulley & line match up again, if so its OK if not then according to the damper manufacturer's recommendations its naf!, they say it should stop in the same place EVERY time!.

    http://www.vectra-c.com/forum/showthread.php?t=116222

  10. #10
    Regular Member jofenan's Avatar
    Join Date
    Mar 2010
    Location
    nottingham
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    well....the pulley definately doesnt stop in the same place as i had to read the part number off the sticker a second time....after a few starts and stops it was at at the bottom and i could read it!

    and it would be under warranty if i wasnt a taxi driver (85k on the clock)...although i had a new engine fitted in jan last year...you only get a year warranty and it was up on the 8th...very annoying

    my local motor factors have to do a special order so i'll be sorting that out tomoz

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1.9 cdti Z19DT estate engine juddering plus white smoke coming from engine bay
    By danedragger in forum Vectra C / Signum Troubleshooting
    Replies: 5
    Last Post: 25th January 2013, 17:44
  2. V6 CDTi Engine Oil
    By rmg1 in forum Vectra C / Signum Car Chat
    Replies: 3
    Last Post: 14th January 2012, 12:28
  3. Hi, 1.9 CDTi, which engine?
    By Craigus in forum Introduce yourself.
    Replies: 4
    Last Post: 1st January 2010, 11:09
  4. What is the best engine oil for 1.9 cdti?
    By Nev in forum Engine & Drivetrain
    Replies: 10
    Last Post: 18th May 2009, 15:21
  5. 1.9 CDTI 150 Engine
    By Gavin in forum Engine & Drivetrain
    Replies: 9
    Last Post: 30th September 2005, 17:09

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •