Been playing again...

[Danwells72]

Just fitted my strut brace Im unhappy with the amount of washers used to space it but happy with the results! Pics when i find my cable.

Next mod:
Get new wheels on but i have a question about 'wobbly' bolts. I know they are safe and all that rubbish but seriously, how do you use them? IE. do i fit the wheel then the bolts as normal or do i line it all up then tighten them a bit at a time?

[0uT1aW]

Just out of interest how many washers you use and what size? I fitted mine without but dont like how much it sits on the brake res

cheers

[kenp]

i use wobly bolt on mine.. every winter but they only can be used to change 1 size.. eg. 108 to 110 or 110 to 112 mm.

[lee gsi]

The spigot rings will centre the wheel.

Then just do the bolts up. The wobblie bolts have a washer on them that will sit in the wheel hole.

[jimbojetset]

[Danwells72]

Just out of interest how many washers you use and what size? I fitted mine without but dont like how much it sits on the brake res

cheers

I fitted it with 2 washers and a spring washer but still didnt like how much it sat on the brake res so have 3 washers and 2 spring washers each bolt. I think i might remove one of the spring washers tho.

i use wobly bolt on mine.. every winter but they only can be used to change 1 size.. eg. 108 to 110 or 110 to 112 mm.

The spigot rings will centre the wheel.

Then just do the bolts up. The wobblie bolts have a washer on them that will sit in the wheel hole.

So it is fit them as normal then

Sorry cant find cable but will continue looking tomorrow

[kenp]

So it is fit them as normal then

Yep