Can anyone please tell me what the fault is as this has come up on my code reader tool, my car is a diesel 1.9 and will not start.
This is the only fault that has come up any help will be great, thanks.
Can anyone please tell me what the fault is as this has come up on my code reader tool, my car is a diesel 1.9 and will not start.
This is the only fault that has come up any help will be great, thanks.
Think it is an o2 Sensor according to my OBD-II Code reader APP on the Iphone
O2 Sensor Voltage too low/Air leak or the Sensor is messing around
Last edited by Keefyb007; 23rd December 2010 at 16:58. Reason: adding comments
The booklet that came with my reader does not have the code listed!!! If its an 02 sensor i would be pleased at least it would be a simple job to replace it. But would this prevent the engine from starting?
The O2 sensor is only picking up the fault, its unlikely to be the actual fault. Most likely to be an air leak somewhere.
P1109 on my lists comes up as either:
Intake Air Temperature (IAT) - B Sensor Intermittent
or
Secondary Port Throttle System
Just been out and the swirl bar has come off and laying on its side how can i fix this its hard to reach it with fingers
metal coat hanger, then use a chopstick and a long screwdriver to put back onto pegs, there is a hole in middle of bar, force chopstick in and line up with pegs and push down with screwdriver, simples 5 min work.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks