Stupid question but how do I get to the bulb on the number plate? I thought I ould ask before I go at it with a hammer and screwdriver lol
Cheers guys
Stupid question but how do I get to the bulb on the number plate? I thought I ould ask before I go at it with a hammer and screwdriver lol
Cheers guys
Release the clip at the right-hand side of each light with a large flat-bladed screwdriver. It can take quite a bit of effort because it's a big clip but it's only plastic, so don't over do it.
The whole light unit then comes out on a short cable. Twist the wiring plug to release the bulb which comes out of the unit on the end of the cable. Replace the bulb and check it works, then refitting is the reversal of removal.
I think you just lever the light unit out of the bumper. There is a slot there for the tip of a screwdriver
Too late
what type of bulb is it as one of mine aint working.
Mine has just gone off as well so I'll be doing it this weekend
super will steal the LED ones i had back off my dad
Just change one tonight with no problems easy fix.. 60p for bulb!!!
Quick Question about the fused one???
Should the Comp have picked this up as a bulb failure because did not have anything flag up only noticed it was blown when unlocking the car and going in to the boot...
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks