in reference to duncan's fix for the beam distance, does anyone know what adjuster if for height on back of units? going to higher beam slightly on day off
in reference to duncan's fix for the beam distance, does anyone know what adjuster if for height on back of units? going to higher beam slightly on day off
Last edited by Deztroyer; 14th December 2010 at 09:45. Reason: removed crap (not in swear filter ???)
The inner of the 2 screws are the up/down adjusters on my headlights (2006 Vectra). They don't need much turning though. IIRC something like a ¼ of a turn made a huge difference in the height.
Cheers dave!
turn the screw anti-clockwise to raise the clockwise to drop the beams in height, as others say it is a very course adjuster, small amountsmove it loads! it takes a long 6mm allan key.
if you look at the surround of the adjusters they are clearly marked
0-Large smile ......every time it's driven
On this subject,
Has anybody noticed how the vertical adjuster moves the beam up/down quickly
but the left/right one takes an age to move if at all.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks