Heater Resistor Pack Help

[manimal]

I understand that the resistor pack can be repaired with a part from Maplins for around 79p.
What do i ask for & how do i fasten it on ?
I've been told it is awkward to fasten it to the connectors.
Anyone done this and would like to share there solution.

Thanx.

[markj23]

ra23a you can either solder it on or cut the plastic of a electrical connection and connect that way you have to do two one for each side and you might have to file down the prongs a bit so they fit in the connector

[manimal]

Thanx Mate

do you get much wire either end to play with ?

[markj23]

yes loads you end up cutting about 2cms one end and 4 cms the other

[manimal]

Thanx.....i get on with it in the next couple of days

[markj23]

just a tip when you get the glove box out of the way the resistor pack is bottom right to remove it, it slides sort of forward to unclip not down in fact it might be more towards the drivers side if you get what I mean

[manimal]

o.k. thanx mate