Hi all
I had my car MOT car and sadly it failed on the drivers head light being a LHD one and not a RHD ????? How can i tell if if is correct? does anyone know the part numbers or a way of telling? also how easy it is to change?
Hi all
I had my car MOT car and sadly it failed on the drivers head light being a LHD one and not a RHD ????? How can i tell if if is correct? does anyone know the part numbers or a way of telling? also how easy it is to change?
I forgot to mention he said the drivers side is kicking out the wrong way or something like that ( should kick to the left but is kicking to the right into on coming traffic)
I'm sure there's something on the light housing to switch it back??
Search on here for threads where people are driving in europe etc...
i reckon that if i take the kick up off the drivers side it should pass with a flat beam then.
Thats odd, is there something at the rear to adjust the beam angle ?
look inside the unit from the rear where you change the bulb. its a tight squeeze to get your hand in. remove the black plastic cover and inside barely visible is a white lever. flick it and that should do the trick.
madman will this make it a flat beam or change the kick direction i will have a go at a diagram below
should be!
\______ \______
but mine are like this
\______ _______/ (drivers side is wrong )
hope your right! Saving me 50 quid. I was on abay looking but asked the questions on here first! Glad i did now!!!
here you go
And here...
http://www.vectra-c.com/forum/showpo...9&postcount=15
Last edited by Leemarksmith; 6th November 2010 at 16:00.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks