What have people done regarding their rear camber adjustment with coilovers fitted?
Anything or nothing?
What have people done regarding their rear camber adjustment with coilovers fitted?
Anything or nothing?
I have heard that there is not alot of camber adjustment on the back but i do believe that Eibach do camber adjustment bolts that are longer than the standard ones.
Only other problem i found was that not alot of people are willing to adjust the rear camber.
LMF do camber ajustmentbolts..
Ahhh I thought it was the rear they sold.
When I changed the rear bushes and track control arms on mine I noticed there were offset head bolts holding the lower arms on (iirc). I guess you may be able to get some adjustment in camber from these.
i thought the rears already had bolts in... only fronts you needed to buy?
there isn't enough adjustment on the rear to bring camber back into spec but you may be able to fit camber shims (I need to looky next time rear wheels are off)
when i had my vectra, i had the camber set to the most upright they could get it which was about -2.6 degrees, i had the car sittin as low as it would though.
Theres a company in australia that does camber adjusters for the rear, K-Mac (not sure if they still do them or not) I bought a set for mine, but decided not to fit as i wanted the camber and tyre wear wasnt as bad as i thought.
the K-mac kit replaced the outer bush of the upper control arm.
Seen the bush kit, but its £200+
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks