Front Fog Light Connector?

[RichyA]

Hi,

I own a 54 plate 1.9 CDTi 150 Vectra Club.

When trying to resolve a problem with my rear washer and I was checking the bottle, pump etc., I noticed a spare plug hanging behind the bumper in the area behind where the fog light would be placed.

Is this connector for a fog light or is it for anything else such as headlight washers?

Am thinking of fitting fog lights so the front of the car doesn't look so bland.

All advice would be appreciated.

[kenp]

A picture of the plug would be nice ..

it could be for the foglights, or the horn..

[RichyA]

Thanks Kenp.

Am going to have another go soon at getting my rear washer to work (Check the filter and check the elbow that connects the pipe for the rear to make sure this isn't blocked too - common fault I understand) so I will take a photo then and will post it up.

Will also check the driver's side to see if there's one over that side too. Surely there wouldn't be 2 connectors for the horn at different sides of the car is my thinking behind this.

[Leemarksmith]

If its the one, maybe washer bottle sensor?

Have you got 2?

[Big Dave]

I've seen a wire hanging down in this area on my Elite, which has front fogs and screen washer sensor, so I don't think it's for either of those.

[Leemarksmith]

My factory front parking sensors wiring comes from that side? but would they bother with that loom in yours?

[RichyA]

Yours may be for headlight washers then Dave.

[RichyA]

If its the one, maybe washer bottle sensor?

Have you got 2?

Don't know. Will have a look at first chance (probably Friday now but may get a chance to do it tonight straight after work) and post it up.

[John LE]

The headlight washer pump plug is taped to the windscreen washer wires

[Big Dave]

Yours may be for headlight washers then Dave.

Maybe, but there wasn't one the other side to match.