Starting to take shape

**Keithy** · 11th September 2010, 14:49

Front end parts on for a test fitting.

Has anyone noticed their bonnet sitting low at the rear, how should i fix this, shims/washers?

**connery-sri** · 11th September 2010, 15:00

Coming on nicely!!

**yadziyad** · 11th September 2010, 15:08

looking good and thanks for the lights got them the other day

**bobssignum** · 11th September 2010, 15:09

Shapeing up nicely there keith , but i think your colour matching is a little out.

**Keithy** · 11th September 2010, 15:10

Originally Posted by yadziyad

looking good and thanks for the lights got them the other day

good, no probs, glad your happy

**Keithy** · 11th September 2010, 15:11

Originally Posted by bobssignum

Shapeing up nicely there keith , but i think your colour matching is a little out.

i'm going for the VW Polo look haha

**ScotsDragon** · 11th September 2010, 15:14

looking good

**Caveman_nige** · 11th September 2010, 15:47

good job mate.. my bonnet sits perfectly level, i would use washers to raise it if it needs it (not sure if their is another method).. you have gone this far you may as well do the job properly as it will only bug you afterwards.

**Keithy** · 11th September 2010, 15:53

Originally Posted by Caveman_nige

good job mate.. my bonnet sits perfectly level, i would use washers to raise it if it needs it (not sure if their is another method).. you have gone this far you may as well do the job properly as it will only bug you afterwards.

I'll check if i have mounted the wings too high first. Also having trouble clipping the bumper in at one side.

Its gonna take lots of farting about to get it all aligned correctly but will be worth it in the end

**glenboy** · 11th September 2010, 17:10

Looking good there Keith,what did you do about the drivers side wing mounting??? Be interested to see if you did the same as me,btw i'm having a problem with the driver side bumper clipping in correctly,but will get there 1 day,keep us updated when you can........