Hid help - pt2

[Dazzy2006]

Following on from this thread

http://www.vectra-c.com/forum/showthread.php?t=116534

I dont know if this is normal but i have just fitted the passenger side but if i fit the cancellor the light does not work but if i remove the cancellor and plug directly into the ballast it works perfectly - no strobing/errors on dash etc ........................... so far

Also will my ballast be safe mounted near the battery?

Any idea's welcome

[Dazzy2006]

Nevermind - i dont seem to need the cancellors maybe their only needed for full canbus cars

I decided it was best to remove the washer bottle spout to get enough access to fit the passenger side and i fitted the ballast inside the battery compartment





Next i removed the airbox and decided the best place for the ballast was here





but i had to shorten this bolt to get it to fit here





Can anyone tell me whether these are the adjusters for the headlights?








The difference is amazing so i cant wait to try them tonight

[Dazzy2006]

Can anyone confirm whether these are the adjusters for the headlights?

[soulman]

yep ...and dont forget the electric leveller as well

[Dazzy2006]

Cheers - and the headlight washers