Code reader in the wiltshire area.

**maximus8425** · 7th July 2010, 20:12

HI,
Is there anybody with a code reader in the Devizes, Andover, Amesbury area that could help me out. I have a 1.9 CDTI 150 with a very bad flat spot to it low down in the rev range and the spanner and car light. I suspect the EGR has given up the ghost but want to try and make sure before I fork out for a new one. I have cleaned it using the excellent how 2 on here but still no joy. Any help would be appreciated

**maximus8425** · 8th July 2010, 11:16

**spennny** · 8th July 2010, 11:26

Have you checked all hoses for holes, splits , have you tried to read the code manually from the car ??

**lizard** · 8th July 2010, 13:45

I am in Southampton if you cant find anyone nearer matey...

**maximus8425** · 8th July 2010, 17:12

It gets stranger, unplugged the EGR today as suggested in some other threads and got the EML, as It said I would. Then plugged the EGR in again, spanner light disappeared, power is back to normal but now have the EML on permanently. Anyone have any suggestions/advice as to how to get rid of the EML?
I did check the vacuum hoses and any others to/from the turbo I could see and no holes or splits.
Cheers lizard I may take you up on that if needed.

**lizard** · 8th July 2010, 18:25

No probs matey

**maximus8425** · 9th July 2010, 11:06

And just to really try my patience spanner light back and EML gone out

spenny can you tell me how to read codes manually?

**Tadpole** · 9th July 2010, 13:21

Originally Posted by maximus8425

And just to really try my patience spanner light back and EML gone out

spenny can you tell me how to read codes manually?

This may help you http://www.vectra-c.com/forum/showthread.php?t=81742 ...

the search button is your friend ........

**rsocon** · 9th July 2010, 13:59

I'm in Swindon and have one of these,

http://www.talktomycar.co.uk/product...iScanMS309.htm

But, as I've just written in another thread it may not be much use.