got some errors but how to FIX ?

**llcoolr** · 6th July 2010, 15:12

B0970 - Hazard Warning Switch Telltale Malfunction
P0704 - Incorrect Clutch Switch Signal
U2139 - CAN-Bus No Communication with CIM (Steering Column Module)
B0970 - Hazard Warning Switch Telltale Malfunction
(0F) - Not present
B0283 - Rear Window Heater Low Voltage or Circuit Open
(06) - Present
B3596 - Invalid Trouble Code Please Ignore!
(00) - Present
B3596 - Invalid Trouble Code Please Ignore!
(00) - Present
B2966 - Driver Doorknob Circuit Open or High Voltage
(05) - PresentB1240 - CD Mechanism Malfunction
(00) - Not present

after made a search found that some errors could be ignored but there is a pre heatting problem and it takes a long time to start.... :d

car is vectra c year 2007 2.0dti

**DarylAAS** · 6th July 2010, 15:19

WOW thats some problems... Have you not taken it to the dealers as theres problems all over the car....

Thanks

**llcoolr** · 27th August 2010, 23:40

all problems fixed but miss this one

Rear Window Heater Low Voltage or Circuit Open

**kenp** · 28th August 2010, 07:51

Fuse?

**soulman** · 28th August 2010, 07:58

is the heater working ????????/ as ken said either fuse or maybe a cut in the eliment.

**llcoolr** · 28th August 2010, 23:09

40a fuse is good....................
what else

**llcoolr** · 6th September 2010, 10:37

Originally Posted by soulman

is the heater working ????????/ as ken said either fuse or maybe a cut in the eliment.

bro can u explain more for me !!!!!!!!!!!!!!!!!
the winter is coming if u see............

**Marky** · 6th September 2010, 16:47

How did you fix this one??

B2966 - Driver Doorknob Circuit Open or High Voltage

**si_hoss** · 6th September 2010, 17:11

Originally Posted by llcoolr

40a fuse is good....................
what else

Maybe a bit late but the spade connector on the side of my rear heated window fell open as was loose, I cut and crimped a new female end on and jobs a goodun! Check yours under the plastic panel either side the window.

Also - to fix "U2139 - CAN-Bus No Communication with CIM (Steering Column Module)" did you replace the CIM? My clocks are dropping out randomly.

Si

**clive3373** · 6th September 2010, 17:40

Originally Posted by si_hoss

Maybe a bit late but the spade connector on the side of my rear heated window fell open as was loose, I cut and crimped a new female end on and jobs a goodun! Check yours under the plastic panel either side the window.

Also - to fix "U2139 - CAN-Bus No Communication with CIM (Steering Column Module)" did you replace the CIM? My clocks are dropping out randomly.

Si

I have this problem,
All the dash goes out speedo / rev counter, everything stops working, but it still drives, and i have a big list of faults after this including:
No communication with cim
No communication with bcm
No communication with rec
Is this a CIM problem?