OPC(VXR) Powerflow Fitted

[OPC]

Having recently sourced a pair of virtually brand new VXR back boxes that had covered less than 500 miles, it was time to chase up Rich (ditchp) and get over to Notts to get everything fitted. This happened on friday and all went smoothly. Had the cat and centre section/box removed and replaced with straight through pipe and y-piece to the VXR boxes, which are stainless as standard
Thanks to Rich for hanging around and getting his hands dirty and changing the rear box rubbers to get a nice snug fit.
Very happy with the results. When driven upto 2k you would not tell the difference in noise to original. Above 2k it is only a bit noisier when driven hard, otherwise no big change in noise.

[Dan_BlackSRi]

Awesome mate

[MAF 3.2 V6 GSi]

Very nice

[parsco]

Looking spot on buddy welcome to the exclusive club

Does it whistle more now like mine? Also when you come off the accelerator above 2k you should hear a nice 'dump' noise. (Kind of sounds like a dove)

[ditchp]

looks superb chris and a pleasure to help you out

[OPC]

Looking spot on buddy welcome to the exclusive club

Does it whistle more now like mine? Also when you come off the accelerator above 2k you should hear a nice 'dump' noise. (Kind of sounds like a dove)

All seems a little quiter than yours, i'm thinking that with only 15k maybe the turbo is not loosened up enough to give much of a whistle. Can here it with window down at low speed.

[GazVXLINE170]

Looks good m8

Gazza4

[mark_647]

Im liking that

[nokiaman1978]

standard exhaust on mine and have noticed the whistle and dump valve like sound since the warm weather as i have had windows down due to aircon not working, sounds cool

[wickedwillie]

Very neat fit. The lad that fitted them has done a top job. Nice.