Has anyone fitted a 2-exit exhaust back box themselves, without having access to a ramp? Is it feasible, or just too much hassle? And do you recommend using exhaust paste where the back box pipe connects to the end of the middle section? Ta.
Has anyone fitted a 2-exit exhaust back box themselves, without having access to a ramp? Is it feasible, or just too much hassle? And do you recommend using exhaust paste where the back box pipe connects to the end of the middle section? Ta.
Get the back end jacked up and throw a couple of decent axle stands underneath and you'll get on fine. Loosly fit everything first and then line it all up and tighten.
Even easier if you have a spare pair of hands to help ya
yes mate, i did my own on my drive took about 45 mins start to finish, i rolled it up onto two little ramps to do mine.. I did not use exhaust paste as i had a nice tight fit and used a new clamp, I have no exhaust leaks (just passed my MOT last week)
Cheers fellas.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks