Hi just about to change the front discs and pads, if I cut the pad sensor wire will the warning light stay on?, didnt bother buying the sensor as I probably wont have the car when the discs need replacing again.
Hi just about to change the front discs and pads, if I cut the pad sensor wire will the warning light stay on?, didnt bother buying the sensor as I probably wont have the car when the discs need replacing again.
If you can't be bothered to replace the sensor, just join the two wires together and the light will go off.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
The car is up for MOT tomorrow night,was just wondering would they fail it if the brake warning light is on,I tried joining and unjoining the wiring but the warning light wont go out.I'll be keeping the car for a long time yet,wont be giving someone else the problem,the brake pads were replaced a few weeks ago.
no it wont fail for the warning light being on
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks