Illuminated Sun Visors result : )

[Cilldara1]

Been to the breakers this morning and picked up Illuminated Sun Visors though not a bad result for £10 quid, anyways day got much better as when I dropped the headlining the connectors were there
all in all fitted both in about 15 minutes....
So heads up to anyone with a Veccy 1.8 2003 Club as Sun Visor & rear Interior light wiring is already there!!!

[danBoy]

Where abouts were the connectors hidden??

Good result though.

[Cilldara1]

Where abouts were the connectors hidden??

Good result though.

Just above Sun Visors taped to the Headlining

[danBoy]

Just above Sun Visors taped to the Headlining

Hmm still been meaning to look on mine, how easy is it to drop the headlining?

[ghostrider]

Theres no real need to drop the lining, just remove the light and plastic surround, you will see the plugs there.

[Grumpy1954]

Been trying breakers here for a spare full size 17 inch alloy so I can deep six the stupid space saver, keep telling me no Vectra C's available.

[Cilldara1]

Theres no real need to drop the lining, just remove the light and plastic surround, you will see the plugs there.

Not the case in mine bud,with the suuround off you could not see the connector, I removed the handle ( passanger side ) removed Sun Visor, then pulled headlining down, connector was taped down above where Sunvisor was located , I did take off the Light Plastic surround however, this helped when removing the tape as it would not stretch far enought to connect to Illuminated Sunvisor! on the drivers side did same however in this case the connector was lapped over and there was more than enought lenght to fit the Sunvisor, HTH

[n8sby]

ive just been out and fitted the visors, rear light and auto dimming mirror no loom for me though i had to take the headlining almost down and fit a new loom, took about an hour and half but well worth the end result

now i can bask in all my lit up glory