User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 8 of 8

Thread: speaker cable

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Regular Member
    Join Date
    Apr 2010
    Location
    burgess hill
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default speaker cable

    is it possible to get new speaker run into the doors, or is it easier just to splice into the existing loom? if i can run my cable in there it would be better but how woiuld i go about doing it??

    thanks

    dave

  2. #2
    Ex Vec-C Admin Ian-Highlander's Avatar
    Join Date
    Jun 2008
    Location
    Ely, Cambridgeshire
    Post Thanks / Like
    Mentioned
    63 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Insignia Tourer

    Trim : Elite

    Engine : 2.0 CDTI (160ps)

    Year : 2010

    Default

    Quote Originally Posted by dave_veccy_c View Post
    is it possible to get new speaker run into the doors, or is it easier just to splice into the existing loom? if i can run my cable in there it would be better but how woiuld i go about doing it??

    thanks

    dave
    Full instructions with pictures of how to do it in my ICE thread in the ICE Gallery forum at the bottom of the forums. Give me a shout if anything's unclear and you need advice.
    "Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
    Maptun Tuned 2.0T Estate - click HERE for mods list.
    Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E

  3. #3
    Regular Member
    Join Date
    Apr 2010
    Location
    burgess hill
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    thats brilliant thanks mate!!

  4. #4
    Regular Member AKeeNShoT's Avatar
    Join Date
    May 2009
    Location
    South Shields, T&W
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    i found the passenger side front a mare, and the drivers side a piece of p1ss, you'll see what i mean when you get there! good luck and dont give up like i nearly did.
    all the best, michael

  5. #5
    Regular Member Gavin2.6's Avatar
    Join Date
    Mar 2010
    Location
    Liverpool
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : 1.9 cdti SRI & 2.6 Vec B & Mk1 Fiesta XR2

    Trim : 2 batteries. 2k RMS. 2x 15 SPL's

    Engine : CDTI 200 16V


    Default

    Quote Originally Posted by AKeeNShoT View Post
    i found the passenger side front a mare, and the drivers side a piece of p1ss, you'll see what i mean when you get there! good luck and dont give up like i nearly did.
    all the best, michael

    As long as you get the fuse box dropped out the way your golden.

    I used a big long screwdriver and taped my cables to it then slide it up the rubber bit inside the car with a little grease in it and it went straight in. Got twin flat 8 awg fli speaker cables through my square connector no probs.

    Just hope the back doors are as easy lol.

  6. #6
    Ex Vec-C Admin Ian-Highlander's Avatar
    Join Date
    Jun 2008
    Location
    Ely, Cambridgeshire
    Post Thanks / Like
    Mentioned
    63 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Insignia Tourer

    Trim : Elite

    Engine : 2.0 CDTI (160ps)

    Year : 2010

    Default

    Quote Originally Posted by Gavin2.6 View Post
    Just hope the back doors are as easy lol.
    They're not but they're not too bad
    "Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
    Maptun Tuned 2.0T Estate - click HERE for mods list.
    Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E

  7. #7
    Ex Vec-C Admin Ian-Highlander's Avatar
    Join Date
    Jun 2008
    Location
    Ely, Cambridgeshire
    Post Thanks / Like
    Mentioned
    63 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Insignia Tourer

    Trim : Elite

    Engine : 2.0 CDTI (160ps)

    Year : 2010

    Default

    Same principle on the rears, the hard part is feeding the cables through the multiplug from the car side as the wiring is hard to get at.
    "Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
    Maptun Tuned 2.0T Estate - click HERE for mods list.
    Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Which Speaker Cable Please?
    By Bethan39 in forum Electrical & ICE (including SatNav)
    Replies: 11
    Last Post: 28th June 2012, 21:30
  2. Beware autoleads speaker cable adapters...
    By luke4487 in forum Electrical & ICE (including SatNav)
    Replies: 2
    Last Post: 8th June 2011, 19:19
  3. Signum speaker and cable adapters?
    By luke4487 in forum Electrical & ICE (including SatNav)
    Replies: 0
    Last Post: 3rd August 2009, 09:58
  4. XBox 360 VGA cable and Advanced SCART cable FS
    By RSV_Ecosse in forum General items for sale
    Replies: 1
    Last Post: 2nd February 2007, 00:01

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •