What size are the brakes on the 2.2 SRi?

[Nato]

Am deciding which brakes to go for on the Vectra, and am considering a set of Mintex drilled and grooved discs. I don't want to order them though, and then find they don't fit!! The brakes are listed as being for the 2.2 SRi, but as they are quite costly, I don't want to make the mistake of buying the wrong size!

Can anyone tell me what size the front and rear discs should be?

[Leemarksmith]

F/285mm - R/278mm

I got these... http://cgi.ebay.co.uk/VECTRA-C-2-2-S...#ht_1008wt_939

[Nato]

I'm looking at THESE as they have pads in the kit as well.

[Deztroyer]

I'm looking at THESE as they have pads in the kit as well.

thats the kit you need

[izonoky]

Nice, I think it's possible to fit larger discs too IIRC up to 314mm (?)

[john_k_sri]

Nice, I think it's possible to fit larger discs too IIRC up to 314mm (?)

You need at least 17" wheels for the 314's though.

[Deztroyer]

and larger calipers and carriers to boot

[Nav-Man]

Are the discs on the SRI 1.8 (petrol) the same size? How do you measure the discs, is it from side to side, or do you also have to measure the thickness?

[Nato]

Are the discs on the SRI 1.8 (petrol) the same size? How do you measure the discs, is it from side to side, or do you also have to measure the thickness?

You measure the diameter across the disc. Not sure if the 1.8 is the same size setup though, I'm sure someone will be along to confirm.

[GazVXLINE170]

Nato the ones you linked to on ebay watch as the picture shows 4 stud pattern, the picture is most likely for show purposes to give an idea of what the discs look like but just to be sure bud.

Gazza4