just fitted the mist type insignia jets , are they ajustable at all , one is higher than the other , just need to know in case a special tool is needed , dead easy mod for under a fiver
just fitted the mist type insignia jets , are they ajustable at all , one is higher than the other , just need to know in case a special tool is needed , dead easy mod for under a fiver
they are but not much special tool is req they're on ebay or a member might have one
so its ok to use a pin /needle Matt ?
They can be adjusted. Yes a special tool is needed. They can be VERY tight to move. So be carefull not to damage them.
as ed said special tool only your local dealer might do it for you
best have a word with me mate at VX then
or make 1 your self using a biro pen lid
or, as has been said, look on ebay, the tools are only around £1.50
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks