Having jusy aquired a NCDC 2015, what options have I got screen wise and what would I get plugging it into the normal GID thats already there.
Thanks Dek
Having jusy aquired a NCDC 2015, what options have I got screen wise and what would I get plugging it into the normal GID thats already there.
Thanks Dek
well you need a GID thats ready for Satnav, or a CID.
You wont get anything.. if you plug it in.. (only if you are unlucky to ruin your current screen).
Have you got any part no's Ken, especially for the CID.
Thanks Dek
Sorry i dont.. as they are very expencive at the dealers...
Having just bought a CID complete with its matching paired NCDC 2013, along with all codes for the original car, can I wire these in then divorce them, so as I can code the screen into my NCDC2015.
Is the NCDC a direct replacement for the CCR 2006, or will I need a different cage.
yes you can. The cage should be the same. Why not decode the ncde at the same time ?. He the 2013 i might could use as mine is broken
Just managed to get the CID and NCDC2013 fitted, everything seems to be working ok, can't test the sat nav yet as I haven't fitted the ariel yet. Then I went to unpair the two, using Vaux.com the CID reported back fine, but the NCDC unit's reporting back is sketchy, sometimes it communicates other times it just keeps trying to connect, but dosen't manage it, when it does communicate it sometimes says its security coded, other times it says its in transit mode, and it even flash's between the two then looses comms, anybody no whats going on.
Could any one thats managed to unpair and pair new units together with vaux.com or op.com let me know the procedure, do I have to go through all the different ECU's and unprogram the CID from them on the can-bus circuit before unpairing the NCDC unit.
And one last question, should the BC controls on the stalk still work, I can operate the BC through the radio itself or from the steering wheel controls, but the stalk seems dead.
Thanks Dek
the BC is controlled via the radio and steeringwheel controls.. not the wiperstalk, when using a NCDC and screen.
hummm mine never been abel to be controlled via the wiperstalk what setting have i missed?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks