does any one know how to turn the abs and tc wanring lights off? i dont think im gonna have time to solve the problem for the mot!
does any one know how to turn the abs and tc wanring lights off? i dont think im gonna have time to solve the problem for the mot!
Either get the fault fixed or take the dash apart and take the bulbs out.
great result!
I thought the "bulbs" were actually LEDs soldered to the PCB.
And as has been said, the ABS light needs to work for the MOT.
http://www.motuk.co.uk/manual_340.htm
.
Yep the entire dash panel is made with LEDS, no chance of disconnecting the correct one without causing even more issues.
Try a reset first with Tech 2 or Op-Com, may just be a temporary fault...otherwise fixing the fault is the only option.
Have you tried disconnecting the battery overnight. - free to do, and sometimes works.
yeh mate tried a disconnect.
think im just gna need to put it into a garage n get it done. its now or never
plain and simple if there is a fault that will fail an mot FIX IT or DONT USE THE CAR.
you can still use the car bit dramatic saying dont use it mate, try disconnecting battery or check all abs sensors are connected
if it wont pass an mot it wont pass a roadside check and will be issued with a PG9 prohibition notice hence dont use
plus will class as driving a vehicle with defective brakes and will result in an endorsement on the drivers license
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks