User Tag List

Thanks Thanks:  0
Likes Likes:  1
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Enabling BC Controls

  1. #1
    Regular Member Signum Dek's Avatar
    Join Date
    Feb 2008
    Location
    South Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default Enabling BC Controls

    Does anybody know if it's possible to enable the BC controls and stalk with Vaux.Com, and which module should I be looking at.

    Thanks
    Dek

  2. #2
    Regular Member
    Join Date
    Feb 2010
    Location
    West Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    With the proper vaux-com, yes (not the chinese copies on fleabay tho).

    It's the variant coding of the CIM and DIS that needs changing, and possibly the code index of the DIS as well.

  3. #3
    Full Member Robsey's Avatar
    Join Date
    Dec 2006
    Location
    North East Cheshire
    Post Thanks / Like
    Mentioned
    30 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra C

    Trim : Energy

    Engine : Z19DTH

    Year : 2005

    Mileage : 150,000

    Default

    If you have a suitable (official / proper) version of Vaux-Com, Op-Com or Tech 2, then all of these will be able to re-program the code indexes and Variant variables.

    The items to reprogram are indeed the CIM module, and the DISplay module.
    remeber to back up the original settings, in-case you reprogram something wrong, and get in a bit of a pickle.
    In the wrong hands, you can do more harm than good...especially after you have entered any security codes.
    Unless you are confident that you know what you are doing, then entrust this to someone who does know what to do.
    (this usually rules out most Vauxhall dealership technicians )

  4. #4
    Regular Member Signum Dek's Avatar
    Join Date
    Feb 2008
    Location
    South Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Quote Originally Posted by stampede View Post
    With the proper vaux-com, yes (not the chinese copies on fleabay tho).

    It's the variant coding of the CIM and DIS that needs changing, and possibly the code index of the DIS as well.
    Hi Stamede, yes I have the fully licensed version of Vaux.Com, what actually are the code index and what do they mean, as you can tell I'm new to this side of things.

    Dek

  5. #5
    Regular Member
    Join Date
    Feb 2010
    Location
    West Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    What display do you have? Pic would be good, part number even better

    (part number will be shown in the diagnostics window when you connect to the DIS with vaux-com)

    If you are stuck, come over and I'll give you a hand, always good to meet other vaux-com users. I know of a couple on Astra Owners Network now and we have switched on various bits and pieces for people.

  6. Likes rd63pw liked this post
  7. #6
    Regular Member BigWilko's Avatar
    Join Date
    Jan 2010
    Location
    Barnsley
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Signum

    Trim : Irmscher Elite

    Engine : 3.0 CDTI

    Year : 2005

    Default

    Hi guys, thought i'd pop in here. Signum dek is gonna try and enable my BC so i thought i might be able to help. I just changed from TID to GID and can get you the part no from the actual unit if it helps. I'd love a 'mini meet' for a bit of Tech2ing... but please hurry.... the empty washer sensor message is killing me!!!

  8. #7
    Admin & Membership Manager bigmac's Avatar
    Join Date
    Jul 2008
    Location
    Devon
    Post Thanks / Like
    Mentioned
    101 Post(s)
    Tagged
    1 Thread(s)
    Vehicle InfoStats

    Vehicle : insignia

    Trim : irmscher

    Engine : 2.0 cdti

    Year : 2009

    Default

    Do what i did and join wires together

    Irmscher Insignia CDTI 130

    MOD'S...Irmscher front spoiler, Irmscher mats, Irmscher door pins, Irmscher rear spoiler, Irmscher grille, Irmscher skirt & exhausts,Irmscher Roof spoiler MOD'S TO COME..Side skirts,Wheels

  9. #8
    Regular Member
    Join Date
    Feb 2010
    Location
    West Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    The "check control" option needs turning off in the UEC (underhood electrical centre) but NOT in the DIS. This way you will lose the washer fluid warnings but keep the bulb etc warnings.

    Or you can just ground out the wires but I would go with the programming method myself.

  10. #9
    Regular Member Signum Dek's Avatar
    Join Date
    Feb 2008
    Location
    South Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Where do you get the index coding info from, just been looking at the help files for the long coding on the VCDS software, on Ilexa's site and that comes with a long coding helper to work out the bytes.

    Dek

  11. #10
    Regular Member
    Join Date
    Feb 2010
    Location
    West Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    You don't need to do any of that with vaux com, just go into the programming screen, then the "program code index" option, and pick the option you need...

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Steering controls
    By Kramel in forum Electrical & ICE (including SatNav)
    Replies: 0
    Last Post: 26th June 2012, 14:24
  2. Enabling BC on CD40 Opera?
    By lee gsi in forum Electrical & ICE (including SatNav)
    Replies: 3
    Last Post: 6th September 2011, 00:22
  3. Enabling BC1, BC2 etc
    By Meady in forum Electrical & ICE (including SatNav)
    Replies: 8
    Last Post: 18th February 2011, 21:31
  4. Enabling board computer CD70
    By westonprawn in forum Vectra C / Signum Car Chat
    Replies: 27
    Last Post: 5th October 2010, 22:19
  5. Enabling xenon on ecu trough tech2?
    By MrBoB in forum Electrical & ICE (including SatNav)
    Replies: 4
    Last Post: 4th June 2009, 09:32

Visitors found this page by searching for:

vectra c bc enable

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •