Spraying the Pre-facelift lower splitter/spoiler

[beethamwest]

How do i fit it?

Just push the spoiler into the gaps made into the sri bumper?

Or is glue required.

[marky boy]

Windscreen sealer is your friend ,strong enough to hold it in place,easy enough to get off at a later date if you need to

[paul.sessions]

push in and put the metal clips on the back then to make it more secure

[Daywalker]

You could also take off the bumper (about 10min job) then put some screws in to hold it secure as well as the glue.

[soulman]

You could also take off the bumper (about 10min job) then put some screws in to hold it secure as well as the glue.

and less likely to be stolen

[Leemarksmith]

Mines screwed, not glued...

Can just unscrew and easily re-paint then if catch it - AGAIN!!

[beethamwest]

After yesterdays mis-ha. I have got the 2AU i require from Halfords, watched them as they mixed it to ensure no foul play
Its all rubbed down, primed 3 times and just in between 3rd and 4th(last) coat of spray.

Laqure will take place before, half time and full time of Liverpool match.

Should i then leave it til' tomorrow before fitting?

[marky boy]

Laqure will take place before, half time and full time of Liverpool match.

Should i then leave it til' tomorrow before fitting?

Might as well doing it during that match,save the tears dripping on the spoiler

[Deztroyer]

give the lacquer plenty of time to set especially if theres any moisture it will not help - the longer it has to dry in the warm and dry the stronger the finish will be

[beethamwest]

Might as well doing it during that match,save the tears dripping on the spoiler

and