User Tag List

Thanks Thanks:  0
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: fog loghts

  1. #1
    Regular Member chris1804's Avatar
    Join Date
    Oct 2009
    Location
    Sandwell
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra C

    Trim : Club

    Engine : Y20DTH

    Year : 2005

    Mileage : 79k

    Default fog loghts

    i have a vectra c club i wanna fit some front fogs, the wiring is there behind the bumper, if i get a new switch with fog light button on would it work ? if not ill wire them up to the battery and relay and put a switch above alarm switch, my question is will sri fog surrounds fit a normal bumper???

  2. #2
    Regular Member
    Join Date
    Dec 2006
    Location
    Oxfordshire
    Post Thanks / Like
    Mentioned
    13 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vauxhall Astra-J

    Trim : Elite

    Engine : 2.0 CDTi

    Year : 2013

    Default

    IIRC, they need a tech2 session to connect them up to the canbus network.

  3. #3
    Regular Member
    Join Date
    Feb 2010
    Location
    Wolverhampton
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Quote Originally Posted by chris1804 View Post
    i have a vectra c club i wanna fit some front fogs, the wiring is there behind the bumper, if i get a new switch with fog light button on would it work ? if not ill wire them up to the battery and relay and put a switch above alarm switch, my question is will sri fog surrounds fit a normal bumper???

    Installed fogs on mine on Friday. Non were on it before hand.

    The fog light surrounds have to match the bumper you have. And the fog lights have to match the surrounds that you have. So if you dont have an SRi Bumper, the surrounds wont fit.

    As for switch, you need a new headlight switch for your dash, my old one only had a button for rear fog lights, you need one with a front fog button. Easyest way to get these out of the dash is to push in the knob for Off/Side/Dipped and turn it clockwise until you feel the knob hold itself inplace whilst pushed in, then pull and the switch unit will come out of the dash.

    As for making them work, Im still trying to get mine to turn on mate. But from what Iv been reading, I need somone with Tech2 gear to make some changes to make the Canbus network recognise that there are now fog lights on the car. I was going to get it looked at today, but the place I was going was closed, but I will report back as soon as thats done.

  4. #4
    Regular Member chris1804's Avatar
    Join Date
    Oct 2009
    Location
    Sandwell
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra C

    Trim : Club

    Engine : Y20DTH

    Year : 2005

    Mileage : 79k

    Default

    Quote Originally Posted by samt View Post
    installed fogs on mine on friday. Non were on it before hand.

    The fog light surrounds have to match the bumper you have. And the fog lights have to match the surrounds that you have. So if you dont have an sri bumper, the surrounds wont fit.

    As for switch, you need a new headlight switch for your dash, my old one only had a button for rear fog lights, you need one with a front fog button. Easyest way to get these out of the dash is to push in the knob for off/side/dipped and turn it clockwise until you feel the knob hold itself inplace whilst pushed in, then pull and the switch unit will come out of the dash.

    As for making them work, im still trying to get mine to turn on mate. But from what iv been reading, i need somone with tech2 gear to make some changes to make the canbus network recognise that there are now fog lights on the car. I was going to get it looked at today, but the place i was going was closed, but i will report back as soon as thats done.

    yea please do repot back, anybody know the part numers from vuxhall for the surrounds,
    I SEE YOU LIVE WOLVERHAMPTOPN SAMT IT AINT A2B VAUXHALL YOU WERE GOING TO WAS IT?

    what colour was your connectors for the fog lights?
    Last edited by chris1804; 7th March 2010 at 19:17.

  5. #5
    Regular Member si_hoss's Avatar
    Join Date
    Apr 2009
    Location
    Stevenage, Herts
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    Anyone got any further on this - I fancy putting front fogs on my 2002 LS...

  6. #6
    Regular Member
    Join Date
    Nov 2007
    Location
    North Wingfield, Chesterfield, Derbyshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra C Hatchback Facelift

    Trim : Club

    Engine : Z18XE

    Year : 2005

    Mileage : 100085

    Default

    Quote Originally Posted by chris1804 View Post
    i have a vectra c club i wanna fit some front fogs, the wiring is there behind the bumper, if i get a new switch with fog light button on would it work ? if not ill wire them up to the battery and relay and put a switch above alarm switch, my question is will sri fog surrounds fit a normal bumper???
    We have a 55 Re Facelift Club and I'm doing this mod..at least working on it....this post I made - extracted from the thread " No Fogs" refers....

    http://www.vectra-c.com/forum/showpo...1&postcount=24

    Not completed yet , due to issues with removing the front bumper which has after market front sensors which I fitted last year.....

    Cheers

  7. #7
    Regular Member chris1804's Avatar
    Join Date
    Oct 2009
    Location
    Sandwell
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra C

    Trim : Club

    Engine : Y20DTH

    Year : 2005

    Mileage : 79k

    Default

    Quote Originally Posted by Tony W View Post
    We have a 55 Re Facelift Club and I'm doing this mod..at least working on it....this post I made - extracted from the thread " No Fogs" refers....

    http://www.vectra-c.com/forum/showpo...1&postcount=24

    Not completed yet , due to issues with removing the front bumper which has after market front sensors which I fitted last year.....

    Cheers

    i need to contact VX and see how much the surrounds are

  8. #8
    Regular Member
    Join Date
    May 2007
    Location
    West Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    £18.00 ish iirc

  9. #9
    Regular Member chris1804's Avatar
    Join Date
    Oct 2009
    Location
    Sandwell
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats

    Vehicle : Vectra C

    Trim : Club

    Engine : Y20DTH

    Year : 2005

    Mileage : 79k

    Default

    Quote Originally Posted by sshooie View Post
    £18.00 ish iirc
    for the two? or each?

  10. #10
    Regular Member
    Join Date
    May 2007
    Location
    West Yorkshire
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Vehicle InfoStats





    Default

    each + VAT there are usually some on fleabay

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •