Hi All, Looking for some help or advice
I am changing my CD 30 for a new Kenwood.
I have all the bits and pieces but it does not seem to be powering on.
I was looking at the wiring of my adaptor and I'm not sure if it is correct or has all te right connections.
Okay the factory fitted in car internal Loom that plugs on to the CD 30 is like this.
Wiring colours
* Clip Slot A Clip Slot B Clip Slot C Clip Slot D
1 Blank....... Green ...... Brown/White WHite
2 Blank....... White....... Brown/Yellow Yellow
3 Red......... Blank........ Brown/Blue... Blue
4 Blank....... Brown....... Brown/Green Green
Undernead this is the pin holes. 12 in all arranged 6 over 6
SO we have
Blank Blank Purple/Red.. Purple/White Blank Blank
Blank Blnak Black........ Blank.......... Blank Blank
I'm guessing all the clipslots in C & D are speaker wires as they seem to be paired off and eventhough they are not the same colour as the adaptor wires all the adaptor wires are marked as left right front rear etc. However I'm unsure of the rest and the adapter colours again don't match and there is no connection to the pin holes and is totally blank there.
Further the colours either don't match up and are different colours.
The adapter wires
* Clip Slot A Clip Slot B Clip Slot C Clip Slot D
1 Blank....... Yellow...... Purple....... Purple/Black
2 Blank....... Pink.......... Grey......... Grey/Black
3 Black....... Blank......... White....... White/Black
4 Blank....... Blank......... Green....... Green/Black
No pin holes and there is also a red and orange free not clipped.
So my issue is ... I have red green white & brown in the clip area and Black in the pin area which I can't connect anything to all coming from the car.
In my adaptor I only have Black (Ground) Yellow(Permanent) Pink(Not named) in the clip area and Red (Switched) & Orange (Not named) hanging free (Not clipped).
SO Black cannon connect to black as they are not compatible Pin to clip.
Even more curious is that Pink is not following through to anything on the player.
No colours were matched up in the adaptor loom to the car loom. Any idea what colours go to what colour?
Your hopefully lost.
Also can I just play around with combinations and not blow anything?
Bookmarks