Quickest way to remove front/rear splitter

**the_wave_rider** · 19th February 2010, 12:33

As the title I need to get both off to try a body kit on but really do not want to take the bumpers off as I still need to use the car and I do not need to put the splitter/apron back on in a hurry either

Cheers

**Big Knox** · 19th February 2010, 12:35

was it factory fitted ?

**robster23** · 19th February 2010, 15:02

My front splitter is always easily removed by the kerb in the car park.....

**antowns** · 19th February 2010, 15:07

the front splitter is really easy mate

just pull and you will see there are some plastic like scews

but a good yank sorts them out

took me about 5 mins to get it off (its split in the middle so there is like 2 of them

)

**Grahamy** · 19th February 2010, 16:57

Originally Posted by antowns

the front splitter is really easy mate

just pull and you will see there are some plastic like scews

but a good yank sorts them out

took me about 5 mins to get it off (its split in the middle so there is like 2 of them

)

then when your sick of yanking at it get your stanly knife out and cut it off like i did

**the_wave_rider** · 19th February 2010, 18:26

Ok cheers lol a yank and a knife......sorted

**the_wave_rider** · 20th February 2010, 14:46

Well mine is a one piece and for the life of me I can,t see any screws and with 15st pulling on it it still wont come off! Grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

**JudgeApocalypse** · 20th February 2010, 15:06

mine falls off when the kerb says hello.

**the_wave_rider** · 20th February 2010, 16:06

Originally Posted by JudgeApocalypse

mine falls off when the kerb says hello.

The screw heads have chewed up on the front and I,ve got the rear off and split it as I did and the bodykit don,t fit anyway as it looks like I,ve been sold the wrong one