Anyone know how to do this??...the difficulty level???...the location of it???
thanks in advance
Anyone know how to do this??...the difficulty level???...the location of it???
thanks in advance
Can anyone confirm the location of the crank sensor?
Can they be cleaned or just a replaced?
Cheers!
Think its just below the oil filter on front of engine
Irmscher Insignia CDTI 130
MOD'S...Irmscher front spoiler, Irmscher mats, Irmscher door pins, Irmscher rear spoiler, Irmscher grille, Irmscher skirt & exhausts,Irmscher Roof spoiler MOD'S TO COME..Side skirts,Wheels
Cheers!
I assume the engine is the same as a 2.2 DTI in a Vectra-B. If so, Don is right as I just changed mine on the B last month and its a pig to get to.
Undertray off, car as high as possible on the axle stands and then try to sqeeze your hand in to get to the torx bolt. You have about a hand space of workable room, so be careful....my hands had scrapes and grazes all over.
The wire on the B's sensor was connected to the top of the engine so you have to follow it up and then snip the cable ties.
Good luck.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks