Just a question...!

**Maxim007** · 25th January 2010, 16:39

Hy all...
Today I fitted on my Signum to my rear lights another bulb to parking lights....
The standard lights is composed by 2 bulbs on each side for parking lights....but today i putted a small wire on the hose of rear light to illuminate the fog light like a park light....you know what I mean...
Now when I switch on the lights in the rear of my car illuminates not 2 bulbs like normally, but 3 (inclusive fog light)...
But now I don`t switch ON the Rear Fog light because will illuminate FOG light with park light together ...until I will put on the wire a Zener diode...that will permit to follow the power just in one side...not in 2...(I mean just from park bulb to fog bulb...and not from fog to park bulb)...
Tomorrow I will came with some pictures to see what i had done...But I`m asking you just like an idea, will be seen more "beautiful" like I`m done or like standard one?

And if someone had putted on his rear lights bulb with leds...because I want to change my bulb with leds and I know if i change them, will see errors in dash board, but if someone can tell me what type of diode or resestence I need to putt on wire to cancel the errors...and if someone have pictures with rear lights with led bulbs please show me what they look...
Thanks and regards

**wardy** · 25th January 2010, 17:35

**Maxim007** · 26th January 2010, 08:57

here is the pic`s...I hope you like it...

**Leemarksmith** · 26th January 2010, 09:52

You mean you wired up the 2nd rear fog?

What seems to be the problem...

**paz_badboy4life** · 26th January 2010, 10:05

i think it is very dangerous, and you should change it back to normal. there is too much RED light going on. you won't be able to tell when your braking.

PaZ!

**dh.dti** · 26th January 2010, 11:13

Why would you want your fog light to act as a park light... dazzling other road users isn't good

**Maxim007** · 26th January 2010, 16:01

What are you see in the pictures is just park light ON....without Brake....and when I`m braking lights up just topped Bulb....now all 3 bulbs have 3.5 volts IN.....Just when braking it`s go 12 volts to the topped bulbs and the braking it`s seen very good...sorry for non grammatical language but i`m from Romania and know just a little English.....
And I think here is no` problem with brake bulb to bee seen by other traffic drivers who drive in my back...because the brake light is more powerful.
I`m just asking you if in this mod the rear of my car is seen much "pretty" comparative with original lights.
Thanks.