Dbilas Flowmaster air filter system.

Matt8 · 13th July 2009, 15:47

I'm looking on doing some more engine work in the coming months and most of the products used will be Dbilas stuff. Just been on the website and came across the flowmaster air filter system. Anybody got one of these on a CDTi 150 and if so what do you think of them?

Cheers, Matt.

rushy · 13th July 2009, 18:43

Its just a Cast air box with a K&N panel filter in the middle mate. Putting a K&N in your stock box will do the exact same thing.

big rich · 13th July 2009, 18:45

dont waste your money m8, they dont give you any more power, vxrvxrvxr fitted one on his astra vxr and notice no gains in power

Matt8 · 13th July 2009, 20:10

Ok chaps, Cheers.
Already have a K&N panel filter, so methinks I will keep the £180 and spend it on other things!!

Matt8 · 13th July 2009, 20:22

Ok chaps, Cheers.
Already have a K&N panel filter, so methinks I will keep the £180 and spend it on other things!!

Matt8 · 13th July 2009, 20:24

Oops. Dunno what happend there!!

ANDY W · 13th July 2009, 20:52

This has answerd a question for me too.
What about a K&n Induction kit with a heat sheild then

rushy · 13th July 2009, 21:06

A stock air box with a K&N panel filter is better than any open intake, shield or not. What you want is something like a Piper Viper. There are always bargains on Ebay, don't look for a specific vectra one. I got a Cotton Green sealed system for £10. All you need to look for is the correct diameter of the Maf.

Look for Cotton Green Twister, Piper Viper, K&N Apollo and Simota Carbon Charger. These are all sealed and will still give you the induction noise. Keep in mind foam filters are worse at filtration than Cotton based filters. HTH

This is the Simota specific for the Astra CDTI modded to fit MattW's Vec. You can easily buy silicone pipework cheaply on ebay to make a kit yourself.

Matt8 · 13th July 2009, 21:38

Very helpfull, Ta. Gonna go for something like that I think. Cheaper too. E-bay is open on another tab as we speak!
Just a shame nobody makes a specific kit for the Vectra yet, apart from K&N and the 57i, which everybody I have spoken too inc. MPG say is a no-no (which makes you wonder about K&N's "legendary" development process")!
What's the diameter of the MAP sensor? I'm not lazy, I'm away from home so can't measure it. Gotta get me some silicone hose!!
Ta, Matt

rushy · 13th July 2009, 21:45

Silicone Hoses and Ally tube.

13th July 2009, 15:47	#1
Matt8 Regular Member Join Date: Mar 2008 Location: Cheshire iTrader Rating: (0)	Dbilas Flowmaster air filter system. I'm looking on doing some more engine work in the coming months and most of the products used will be Dbilas stuff. Just been on the website and came across the flowmaster air filter system. Anybody got one of these on a CDTi 150 and if so what do you think of them? Cheers, Matt.

13th July 2009, 18:43	#2
rushy Full Member Join Date: Jul 2005 Location: Leeds iTrader Rating: (2) rushy's Garage	Its just a Cast air box with a K&N panel filter in the middle mate. Putting a K&N in your stock box will do the exact same thing. __________________ *******Click HERE for the ultimate knowledge base*******

13th July 2009, 21:06	#8
rushy Full Member Join Date: Jul 2005 Location: Leeds iTrader Rating: (2) rushy's Garage	A stock air box with a K&N panel filter is better than any open intake, shield or not. What you want is something like a Piper Viper. There are always bargains on Ebay, don't look for a specific vectra one. I got a Cotton Green sealed system for £10. All you need to look for is the correct diameter of the Maf. Look for Cotton Green Twister, Piper Viper, K&N Apollo and Simota Carbon Charger. These are all sealed and will still give you the induction noise. Keep in mind foam filters are worse at filtration than Cotton based filters. HTH This is the Simota specific for the Astra CDTI modded to fit MattW's Vec. You can easily buy silicone pipework cheaply on ebay to make a kit yourself. __________________ *******Click HERE for the ultimate knowledge base******* Last edited by rushy; 13th July 2009 at 21:11.

13th July 2009, 21:38	#9
Matt8 Regular Member Join Date: Mar 2008 Location: Cheshire iTrader Rating: (0)	Very helpfull, Ta. Gonna go for something like that I think. Cheaper too. E-bay is open on another tab as we speak! Just a shame nobody makes a specific kit for the Vectra yet, apart from K&N and the 57i, which everybody I have spoken too inc. MPG say is a no-no (which makes you wonder about K&N's "legendary" development process")! What's the diameter of the MAP sensor? I'm not lazy, I'm away from home so can't measure it. Gotta get me some silicone hose!! Ta, Matt Last edited by Matt8; 13th July 2009 at 21:47.

13th July 2009, 21:45	#10
rushy Full Member Join Date: Jul 2005 Location: Leeds iTrader Rating: (2) rushy's Garage	Silicone Hoses and Ally tube. __________________ *******Click HERE for the ultimate knowledge base*******

13th July 2009, 18:45	#3
big rich Regular Member Join Date: Nov 2008 Location: birmingham iTrader Rating: (25) big rich's Garage	dont waste your money m8, they dont give you any more power, vxrvxrvxr fitted one on his astra vxr and notice no gains in power

13th July 2009, 20:10	#4
Matt8 Regular Member Join Date: Mar 2008 Location: Cheshire iTrader Rating: (0)	Ok chaps, Cheers. Already have a K&N panel filter, so methinks I will keep the £180 and spend it on other things!!

13th July 2009, 20:22	#5
Matt8 Regular Member Join Date: Mar 2008 Location: Cheshire iTrader Rating: (0)	Ok chaps, Cheers. Already have a K&N panel filter, so methinks I will keep the £180 and spend it on other things!!

13th July 2009, 20:24	#6
Matt8 Regular Member Join Date: Mar 2008 Location: Cheshire iTrader Rating: (0)	Oops. Dunno what happend there!!

13th July 2009, 20:52	#7
ANDY W Regular Member Join Date: May 2007 Location: WINSFORD iTrader Rating: (2)	This has answerd a question for me too. What about a K&n Induction kit with a heat sheild then

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
02 Vectra Elite Warning Light	Mongoose	Engine & Drivetrain	33	23rd April 2010 00:47
Fault code site.	rushy	Troubleshooting	22	7th December 2009 19:15
K&N Filter - I really am a plonker	john_k_sri	Vectra C / Signum Car Chat	16	6th February 2009 20:50
BMC CDA filter / DBilas intake	Vid	Petrol Engine related	2	16th June 2008 19:55