Hello!
I need to do this modification on DVD 90 2006 Signum! Does it need to add some components in unit or only add pins in connector???
Hello!
I need to do this modification on DVD 90 2006 Signum! Does it need to add some components in unit or only add pins in connector???
Could @Admin move this to the how to section? I would but don't have the option to
Right, as I'm getting this activated this weekend, I thought I'd post on how I've gone about it. I went off a mixture of the various pdf guides and also the schematic. Attached are photos showing of what component value I put where.
THIS IS NOT IN ANYWAY FOR PEOPLE TO COPY. As of yet anyway. If it works then feel free.
If anyone can spot anything they think will cause problems please let me know.
sorry for the photo quality, iPhone and all that
update on this, got it programmed at the weekend by the kind @Woody, but i'm only getting sound out the left channel, my first port of call is going to be checking all the solder joints, anyone got any other ideas
Look up the schematics for the TDA chip and see which one is the right hand input and follow it backwards until you find the issue..
Plasma's Tech2 services are now open and able to provide services
any luck?
Plasma's Tech2 services are now open and able to provide services
thought u was going over it earlier on?
Plasma's Tech2 services are now open and able to provide services
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks